Programme
Prof. J. Nathan Kutz
MS Corresponding Organizer:
Mr.
J. Nathan Kutz
(University of Washington)
Chaired by:
Prof. Harald van Brummelen
(Eindhoven University of Technology)
MS Corresponding Organizer:
Dr.
Marco ten Eikelder
(TU Darmstadt)
Chaired by:
Dr. Marco ten Eikelder
(TU Darmstadt)
-
An Interface and Geometry Preserving Phase-Field Method for Multiphase FSI
X. Mao -
Study of a conservative Allen-Cahn equation for multiphase flows and other phase field problems
T. Gebäck -
Higher order two-step time discretization methods for numerical simulations of a Navier–Stokes–Cahn–Hilliard diffuse interface model
T. van Sluijs , P. Behnoudfar , S. Stoter , H. van Brummelen -
A Phase-Field Model of Elastic Surfaces in Flow
M. Kloppe , S. Aland -
Generalized FSI Contact in a Phase-field based Fully Eulerian Framework
B. Rath , X. Mao , R. Jaiman -
Isogeometric Analysis of Vesicle Hydrodynamics: A Study on Single Vesicles and Vesicle-Vesicle Interactions using Phase-Field Models
N. Valizadeh , M. Ashour , T. Rabczuk
MS Corresponding Organizer:
Dr.
Filipe Pereira
(Los Alamos National Laboratory)
Chaired by:
Dr. Fernando Grinstein
(Los Alamos National Laboratory)
-
Keynote
On Coarse Graining Turbulence Simulations
F. Grinstein , V. Chiravalle , B. Haines , R. Greene , F. Pereira -
Three-dimensional multi-physics ILES simulations of material mixing and thermalization in separated reactants inertial confinement fusion implosions
B. Haines , T. Murphy , R. Olson , Y. Kim , B. Albright , B. Appelbe , T. Day , M. Gunderson , C. Hamilton , T. Morrow , B. Patterson -
Modeling the velocity gradient dynamics in turbulent flows using physics-assisted neural networks.
D. Shikha , S. Sinha -
LES of MHD Taylor-Couette flow for control of wind turbines
H. Kobayashi , T. Hasebe , T. Fujino , H. Takana
MS Corresponding Organizer:
Prof.
Jose Madeira
(IDMEC, IST, Universidade de Lisboa)
Chaired by:
Dr. Lino J. Alvarez-Vazquez
(University of Vigo)
,
Mr. Francisco Vieira
(IDMEC, Instituto de Engenharia Mecânica)
-
Multi-Mode Passive Shunted Damping Configurations for Vibration Attenuation
J. Madeira , A. Araújo -
Application of Structural Optimization on Lattice Structure Design using Superelastic Material
M. Kofler , M. Schasching , O. Cervinek , F. Zwicke , D. Koutny , H. Pettermann , M. Todt -
Combined Optimisation of the Layout and Topology of Stiffeners for Thin-Walled Structures using FE-Based Parameterisations
M. Kamper , F. Naets -
Level set-based topology optimization for variable thickness coated structures
N. Hermann , M. Langelaar , L. Noël -
Exploring Plasticity Material Models in Level-Set Topology Optimization
M. Pozzi , A. Guibert , A. Kim , F. Braghin
MS Corresponding Organizer:
Prof.
Mokarram Hossain
(Swansea University)
Chaired by:
Prof. Mokarram Hossain
(Swansea University)
,
Prof. Ajeet Kumar
(IIT Delhi)
-
Keynote
Nonlinear Electro-Elastic Finite Element Analysis with Neural Network Constitutive Models
D. Klein , R. Ortigosa , M. Hossain , O. Weeger -
An interface finite element for modeling debonding in magneto-active elastomers
W. Klausler , M. Kaliske -
Hard-Magnetic Soft Mechanical Metamaterials: Design and Wave Manipulation
Q. Zhang , S. Rudykh -
Programming shape-morphing magneto-active polymer composites through multi-physics informed topology optimization
R. Ortigosa , J. Martínez , D. García-González -
A Computational Model for Elasto-Capillary Phenomena in Elastomers
X. Zhang , Y. Yang , F. Xu
MS Corresponding Organizer:
Dr.
Andreas Lundbäck
(Luleå University of Technology)
Chaired by:
Dr. Andreas Lundbäck
(Luleå University of Technology)
,
Prof. Jesper Hattel
(Danmarks Tekniske Universitet (DTU))
-
Keynote
Coupling grain growth and anisotropic mechanical behavior at track scale by thermal-metallurgical-mechanical simulations
Z. Li -
Grain structure based mechanical simulation for laser beam melting at part scale
T. Vo , M. Bellet , C. Gandin , Y. Zhang -
Modeling the Evolution of Grain Texture during Solidification of Additive Manufactured Alloy 625
C. Andersson , A. Lundbäck -
Neural cellular automata for accelerating microstructure simulations of additive manufactured alloys
J. Tang , M. S Mohebbi , L. De Lorenzis , E. Hosseini -
Microstructure Monitoring for Additive Manufacturing using Coupled Deep Neural Operators and Neural-Cellular-Automata
S. Kasiri Habibabadi , H. Safari , H. Wessels
MS Corresponding Organizer:
Dr.
Michael Abdemalik
(Eindhoven University of Technology)
Chaired by:
Dr. Michael Abdemalik
(Eindhoven University of Technology)
,
Dr. Torsten Keßler
(TU Eindhoven)
-
Model Order Reduction and Moment Models for Rarefied Gases
J. Koellermeier -
Variational Multiscale Moment Methods for the Boltzmann Equations
F. Baidoo , I. Gamba , L. Caffarelli , T. Hughes , M. Abdelmalik -
Derivation of L^2-Stable Regularized 13-Moment Equations for Rarefied Gases
Z. Cai , B. Lin , H. Wang , S. Yang -
Entropy dissipative systems of quadratures
T. Pichard -
Moment models based on a Hilbert expansion for the kinetic equation of electrons in a weakly-ionized plasma
A. Alvarez Laguna , T. Pichard -
Electron Probe Microanalysis: An Inverse Problem for the Radiative Transfer Equation
M. Torrilhon -
On the systematic treatment of boundary conditions in PN-approximations of radiative transfer
H. Egger , M. Schlottbom
MS Corresponding Organizer:
Prof.
Fadi Aldakheel
(Leibniz Universität Hannover)
Chaired by:
Prof. Fadi Aldakheel
(Leibniz Universität Hannover)
,
Prof. Miguel Bessa
(Brown University)
-
Keynote
Machine Learning for the Inverse Design of Architected Materials
L. Zheng , J. Bastek , K. Karapipersi , S. Kumar , D. Kochmann -
Parameterized hyperelastic material modeling and multiscale topology optimization with physics-augmented neural networks
O. Weeger , D. Klein , F. Roth , F. Püsch , K. Maute -
Deep learning-aided inverse design of porous metamaterials
T. Nguyen , Y. Heider , F. Aldakheel -
Experiment-informed Finite-strain Inverse Design of Spinodal Metamaterials
P. Thakolkaran , M. Espinal , S. Dhulipala , S. Kumar , C. Portela -
Unifying the design space and optimizing linear and nonlinear truss metamaterials by generative modeling
L. Zheng , K. Karapiperis , S. Kumar , D. Kochmann
MS Corresponding Organizer:
Prof.
Stefan Turek
(TU Dortmund University)
Chaired by:
Prof. Axel Klawonn
(Universität zu Köln)
,
Prof. Stefan Turek
(TU Dortmund University)
-
Keynote
Massively Parallel & Low Precision Accelerator Hardware as Trends in HPC and its Application to CFD
S. Turek -
Augmented Lagrangian Acceleration of Global-In-Time Fluid Solvers
C. Lohmann , S. Turek -
Optimizing FE-Multigrid Methods for Convection-Diffusion Equations via Space-Time Parallelization
W. Drews , S. Turek -
Space-time Multigrid Methods for Convection-diffusion Equations Arising from Flow Problems
J. Dünnebacke , S. Turek -
Numerical Investigation of a Local Schur-Complement Based Space-Time Preconditioner for the Incompressible Navier-Stokes Equations
M. Esser , S. Turek
MS Corresponding Organizer:
Dr.
Andre Massing
(Norwegian University of Science and Technology)
Chaired by:
Dr. Andre Massing
(Norwegian University of Science and Technology)
,
Prof. Mats G. Larson
(Umea University)
-
Analysis of Divergence-Preserving Unfitted FEM for the Mixed Poisson Problem
C. Lehrenfeld , T. van Beeck , I. Voulis -
Parameter-robust unfitted finite element methods for a Maxwell interface problem
T. Haubold , C. Lehrenfeld -
A Reduced Lagrange Multiplier Approach for Coupling Mixed-Dimensional Problems
L. Heltai , P. Zunino -
Unique continuation for an elliptic interface problem using unfitted isoparametric finite elements
E. Burman , J. Preuss -
A Finite Element Method for the Simultaneous Analysis of Implicitly Defined Reissner-Mindlin Shells
M. Kaiser , T. Fries -
Implicit-Explicit Time Integration for Immersed Boundary Wave Equations
C. Fassbender , T. Bürchner , P. Kopp , S. Kollmannsberger , E. Rank
MS Corresponding Organizer:
Ms.
Martha Kalina
(TU Dresden)
Chaired by:
Ms. Martha Kalina
(TU Dresden)
,
Prof. Haim Waisman
(Columbia University)
-
On the Energy Decomposition in Variational Phase-Field Models for Brittle Fracture Under Multi-Axial Stress States
F. Vicentini , C. Zolesi , P. Carrara , C. Maurini , L. De Lorenzis -
Bifurcation Theory of Plasticity, Damage and Failure
A. Umantsev -
Phase-Field Fatigue Modeling in Ductile Materials
V. Dunić , M. Živković , V. Milovanović -
Accelerating Phase-Field Fatigue Computations with an Adaptive Cycle Jumping Scheme
J. Heinzmann , P. Carrara , L. De Lorenzis -
Fatigue Characterization in (Quasi-)brittle Materials Using the Micromechanics-based Phase-field Method
M. Sarem , N. Deresse , J. Ulloa , E. Verstrynge , S. François -
Neural networks as PDE solvers within FEM: expediting the non-local gradient damage propagation with I-FENN
P. Pantidis , D. Abueidda , H. Eldababy , M. Mobasher
MS Corresponding Organizer:
Dr.
Michele Terzano
(Graz University of Technology)
Chaired by:
Prof. Gerhard Holzapfel
(Graz University of Technology)
,
Dr. Michele Terzano
(Graz University of Technology)
-
Region- and Rate-dependent Microscale Properties of Human Brain White Matter
M. Terzano , G. Holzapfel -
Microstructure-based Modelling Reveals Macroscale Transport Property of Brain Tissues
T. Yuan , W. Zhan , L. Shen , D. Dini -
Exploring the role of different cell types in cortical folding through a physical multifield computational model.
M. Zarzor , S. Budday -
A Continuum Human Brain Model with Embedded Vasculature to Investigate In-Vivo Testing
Y. Verma , E. Griffiths , J. Schattenfroh , C. Belponer , A. Caiazzo , I. Sack , S. Budday , L. Heltai , P. Steinmann -
Numerical Modeling of Brain Multiphysics Flow Dynamics and Waste Clearance by a Polytopal Discontinuous Galerkin Method
I. Fumagalli , M. Corti , N. Parolini , P. Antonietti -
Polytopal discontinuous Galerkin methods for the prionic proteins' spreading in neurodegeneration
M. Corti , F. Bonizzoni , A. Dall'Olio , P. Antonietti
MS Corresponding Organizer:
Prof.
François Jouve
(Université Paris Cité)
Chaired by:
Prof. François Jouve
(Université Paris Cité)
,
Mr. Charles Dapogny
(CNRS, Laboratoire Jean Kuntzmann, Université Grenoble Alpes, Saint Martin d’Hères)
-
Topology optimization for thermal conductivity problems with an approximated thermal radiation boundary conditions depending on design variables
S. ONODERA , T. YAMADA -
Synthesis Approach for Multi-Input/Multi-Output Link Mechanisms Based on Micropolar Elasticity Model and Topology Optimization Method
Y. Sayo , T. Yamada -
Minimum Length and Overhang Constraints for both Level Set and Density Approaches via Perimeter Minimization
J. Torres , A. Ferrer , F. Otero -
Homotopy for Shape Optimization
B. Endtmayer , P. Gangl -
Integration of Topology Optimization and Sizing Optimization Techniques for Advanced Orthotic Design
D. Patel , T. Rockenbauer , T. Antretter , S. Schloegl , M. Lang -
Morphing Lattice Structures via Hybrid Level-Set/Density Topology Optimization using Morfeo
P. Beaufort , J. Leclerc , E. Kuci
MS Corresponding Organizer:
Prof.
Alessandro Reali
(University of Pavia)
Chaired by:
Prof. Alessandro Reali
(University of Pavia)
,
Prof. Giancarlo Sangalli
(University of Pavia, Italy)
-
Keynote
Discretizing de Rham complexes with spline differential forms and applications to problems in fluid mechanics
D. Toshniwal -
Isogeometric Analysis based mesh adaptation for time dependent problems
B. MUSTAPHA , H. Abderrahmane , R. Ahmed -
Floating Isogeometric Analysis for Extrusion Simulation in Three Dimensions
H. Hille , S. Kumar , L. De Lorenzis -
The Shifted Boundary Method (SBM) in Isogeometric Analysis (IGA)
N. Antonelli , R. Rossi , R. Zorrilla , R. Aristio , R. Wuchner , G. Scovazzi -
CAD-Integrated Isogeometric Analysis of Trimmed Multipatch Shells in Embedded Fluid-Structure Interaction
R. Aristio , R. Wüchner
MS Corresponding Organizer:
Prof.
Marco D. de Tullio
(Politecnico di Bari)
Chaired by:
Prof. Marco D. de Tullio
(Politecnico di Bari)
,
Mr. Alessandro Nitti
(Polytechnic University of Bari)
-
Numerical Study of Penguin Wing Propulsion Using Immersed Boundary Method
B. Yin , S. Huang , D. Guo , G. Zheng , G. Yang -
Collective locomotion of two force-driven flexible flapping foils
F. Deng , C. Wang , H. Tang -
3D Simulation of Air-Structure Interaction in Dragonfly Hindwings
D. Di Cristofaro , M. Cremonesi , A. Frangi -
Transition from jet propulsion to rowing propulsion in biologic swimmers
A. Nitti , M. Torre , A. Reali , M. de Tullio -
Computational Modelling of Nature-Inspired Magnetic Soft Robots: Swimming Modes and Swarming Behavior
R. Pramanik , P. Onck , R. Verstappen -
Coupled Immersed Boundary and Level-Set Method to Study the Water Exit of Flying Fish
B. Yin , S. Huang , D. Guo , G. Yang , G. Zheng
MS Corresponding Organizer:
Phd.
Nicolas Valle
(Technische Universiteit Delft)
Chaired by:
Prof. Arthur Veldman
(University of Groningen)
,
Phd. Nicolas Valle
(Technische Universiteit Delft)
-
Regularization errors in the one-fluid formulation
D. Fuster , Y. Mimoh -
A Novel Weakly Compressible Solver for Incompressible Two-Phase Flows
A. Melvin , J. Mandal -
An HLLC Solver for Incompressible Two-Phase Flow Problems using Conservative Level Set Method
S. Parameswaran , S. Bhat , J. Mandal -
Divergence Free Velocity Interpolation For Surface Marker Tracking
E. Aulisa , G. Barbi , A. Cervone , A. Chierici , F. Giangolini , S. Manservisi , L. Sirotti -
Characterizing numerical surface tension in the conservative volume-of-fluid method
T. Huang , A. Lidtke , K. Hendrickson , T. van Terwisga , G. Weymouth -
Conditions for the Conservative Discretization of Surface Tension in Interface-Capturing Methods.
N. Valle , R. Verstappen , F. Trias
MS Corresponding Organizer:
Dr.
Konrad Perzyński
(AGH University of Krakow)
Chaired by:
Dr. Konrad Perzyński
(AGH University of Krakow)
,
Ms. Paulina Stempin
(Poznan University of Technology)
-
The Continuous Adjoint Method with Consistent Discretization Schemes for Transitional Flows and the Use of Deep Neural Networks in Shape Optimization in Fluid Mechanics
M. Kontou -
A New Updated Reference Lagrangian Smoothed Particle Hydrodynamics Framework for Large Strain Solid Dynamics
P. Refachinho de Campos , A. Gil , C. Hean Lee , J. Bonet -
Structure-preserving deep learning
Q. Hernández , A. Badías , E. Cueto -
Gradient-based optimization of non-linear structures and materials
A. Dalklint -
Fuel and operational flexibility of micro Gas Turbines: assessment of combustor performances, emissions, and stability
A. Pappa -
Friction and Fracture: Richness and Complexity in Dynamic Rupture
T. Roch
MS Corresponding Organizer:
Dr.
Alberto Barontini
(University of Minho, ISISE, ARISE)
Chaired by:
Dr. Alberto Barontini
(University of Minho, ISISE, ARISE)
-
Physics-informed machine learning surrogate for applications in structural health monitoring and development of digital twins of wind turbines
S. Baisthakur , B. Fitzgerald -
Federated Physics-Informed Machine Learning for Ultrasonic Structural Health Monitoring of Aircraft Structures
L. Jilke , F. Raddatz , N. Hosters , M. Behr , G. Wende -
Efficient Active Learning for Sparse Gaussian Process Classifiers in SHM
J. Mclean , N. Dervilis , T. Rogers -
Virtual Concrete Lab: A Multiscale Computational Framework for Early Damage Assessment through Coda Signal Analysis
G. Vu , J. Timothy , G. Meschke -
Physics-Augmented Neural Networks for Constitutive Modeling: Toward an Application for Structural Health Monitoring
A. Benady , S. Farahbaksh , E. Baranger , L. Chamoin -
Enhancing Offshore Wind Turbine Health Monitoring through a Hybrid Approach of Reduced Order Modelling and Machine Learning
A. Pastor Sanchez , J. Garcia Espinosa , D. Di Capua
MS Corresponding Organizer:
Dr.
Isabelle RAMIERE
(CEA Cadarache)
Chaired by:
Prof. David Ryckelynck
(Mines Paris PSL - Armines)
,
Dr. Isabelle RAMIERE
(CEA Cadarache)
-
Displacement-driven Approach for Frictional Contact Problem between Rigid and Deformable Bodies
D. Rahmi , R. Fleischhauer , M. Kaliske -
A Fundamentally New Coupled Approach to Contact Mechanics via the Dirichlet-Neumann Schwarz Alternating Method
A. Mota , D. Koliesnikova , I. Tezaur , J. Hoy -
Modeling Mechanical Contact with an Eulerian-based Finite-Element Method
D. Kammer , F. Lorez , M. Pundir -
Accelerating Finite Element Contact Simulations Using H-Matrices
V. Yastrebov , Z. Fend -
High Performance Computing Strategy for 3D Contact Mechanics Problems with Adaptive Mesh Refinement
A. Epalle , I. Ramière , G. Latu , F. Lebon -
Scalability of the time-to-solution of mortar-based contact problems
C. Steimer , M. Mayr , A. Popp
MS Corresponding Organizer:
Dr.
Esther Andrés Pérez
(INTA)
Chaired by:
Dr. Esther Andrés Pérez
(INTA)
,
Dr. Domenico Quagliarella
(CIRA)
-
Aerodynamic predictions under uncertainty using Autoencoders
E. Saetta , R. Tognaccini , G. Iaccarino -
Registration-based Model Order Reduction for Aerospace Propulsion Systems
A. Ferrero , L. Stumpo , T. Taddei -
Inverse airfoil design considering uncertainties of GAN models
K. Yonekura , R. Aoki , K. Suzuki -
Multi-Fidelity Surrogate Model for Efficient Aerodynamic Predictions
J. Nieto-Centenero , A. Martinez-cava , E. Andrés -
Comparison of data -driven methods for the prediction of flows about a wing
M. LIPPI , J. PETER
MS Corresponding Organizer:
Dr.
Massimo Carraturo
(University of Pavia)
Chaired by:
Prof. Ferdinando Auricchio
(University of Pavia)
,
Dr. Massimo Carraturo
(University of Pavia)
-
Analysis of fatigue strength for AM lattice components using FCM based on strain energy density approach
O. Oztoprak , R. De Biasi , M. Benedetti , E. Rank , S. Kollmannsberger -
Investigation on the Mechanical Response of Gyroid-Based Structures With Application to Airless Tires
D. D'Aprile , F. Auricchio , P. Wriggers , S. Morganti -
Effect of randomly distributed imperfections on the buckling response of soft lattice metamaterials
D. Addessi , C. Gatta , P. Di Re , L. Parente , E. Sacco -
Investigating Auxetic Structures to Enhance Energy Absorption in Flexible Structures: An Integrated Experimental and Numerical Approach
B. Pi Savall , S. Seyedpour , T. Ricken -
Multiscale Design Method for 3D-printable Periodic Lightweight Lattice Structures by Architectured 3D Micro-Cells
O. Schwahofer , A. Ferrer , J. Torres , K. Drechsler
MS Corresponding Organizer:
Dr.
Maria Han Veiga
(Ohio State University)
Chaired by:
Dr. Maria Han Veiga
(Ohio State University)
,
Mr. Lorenzo Micalizzi
(North Carolina State University)
-
Keynote
Discrete fully well balanced WENO finite difference schemes via a global-flux quadrature method
M. Kazolea , C. Parés , M. Ricchiuto -
Structure preserving methods via Global Flux quadrature: divergence-free preservation with continuous Finite Element
D. Torlo , W. Barsukow , M. Ricchiuto -
An arbitrarily high-order fully well-balanced hybrid finite element-finite volume method for one-dimensional blood flow models
R. Abgrall , W. Barsukow , Y. Liu -
Efficient Tsunami Modeling with Hyperbolic-Dispersive Systems in GeoClaw
C. Muñoz , M. Berger , D. Ketcheson , R. LeVeque , K. Mandli -
A General Procedure To Construct High-Order Well-Balance Finite Volume Schemes For 1D Hyperbolic Balance Laws With Singular Source Terms
M. Castro , I. Gómez Bueno , C. Parés Madroñal
MS Corresponding Organizer:
Mr.
Matteo Torzoni
(Politecnico di Milano)
Chaired by:
Dr. Marco Tezzele
(Emory University)
,
Mr. Matteo Torzoni
(Politecnico di Milano)
-
Keynote
Structural Integrity Management at Scale through Deep Reinforcement Learning
C. Andriotis -
Belief Deep Markov Models for inference in complex partially observable decision-making problems
G. Arcieri , A. Kamariotis , K. Papakonstantinou , D. Straub , E. Chatzi -
A Probabilistic Neural Twin for Treatment Planning in Peripheral Pulmonary Artery Stenosis
J. Lee , J. Richter , M. Pfaller , J. Szafron , K. Menon , A. Zanoni , M. Ma , J. Feinstein , J. Kreutzer , A. Marsden , D. Schiavazzi -
Predictive digital twins of engineering structures using neural networks and probabilistic graphical models
M. Torzoni , M. Tezzele , S. Mariani , A. Manzoni , K. Willcox
MS Corresponding Organizer:
Dr.
Federico Pichi
(SISSA)
Chaired by:
Phd. Stefania Fresca
(Politecnico di Milano)
,
Dr. Federico Pichi
(SISSA)
-
Keynote
Time Integration of Parametrized Partial Differential Equations with Neural Network Surrogate Models
M. Kast , J. Hesthaven -
A Novel Reduced-Order Model for Advection-Dominated Problems Based on the Radon-Cumulative-Distribution Transform
G. Stabile , T. Long , R. Barnett , R. Jefferson-Loveday , M. Icardi -
Data-driven Models for Mold-based Processes
R. Pohlmann , A. Gruber , R. Rao , N. Trask , S. Elgeti -
Neural Galerkin Schemes That Can Preserve Hamiltonians and Other Quantities
P. Schwerdtner , P. Schulze , J. Berman , B. Peherstorfer -
A Deep Learning Surrogate Model for Reservoir Characterization
C. Millevoi , C. Zoccarato , M. Ferronato
MS Corresponding Organizer:
Mr.
Hervé Moulinec
(Laboratoire de Mecanique et d’Acoustique / CNRS)
Chaired by:
Mr. Hervé Moulinec
(Laboratoire de Mecanique et d’Acoustique / CNRS)
-
Keynote
Spectral Solvers for Multi-Physics Simulations
M. Diehl , Y. Hu , S. Roongta , F. Roters -
Fast Fourier Transform Methods for computing the moduli and fields in composites
G. Milton , H. Moulinec , P. Suquet -
Accurate Algebraic Error Estimation in FFT-based Computational Homogenization
M. Ladecký , J. Papež , L. Gaynutdinova , P. Tichý , I. Pultarová , J. Zeman -
Application of the FFT-based Homogenization Method to estimate the Linear Viscoelasticity of Transversely Isotropic Unidirectional Composites
T. Merlette , J. Diani -
Micromechanical modeling of the viscoplastic behavior of irradiated bainitic steels
L. Chaix , M. Garajeu , M. Idiart , G. Monnet , P. Vincent
MS Corresponding Organizer:
Dr.
Oindrila Kanjilal
(Engineering Risk Analysis Group)
Chaired by:
Dr. Oindrila Kanjilal
(Engineering Risk Analysis Group)
,
Dr. Iason Papaioannou
(Technical University of Munich)
-
Robust design optimization using adaptive Kriging and extreme value distributions.
A. Persoons , D. Moens -
Reliability-based Optimization of Regional Building Retrofit Subsidy Support Strategy Using Buffered Failure Probability
U. Seok , J. Byun , J. Song -
Multi-level informed robust optimization of energy systems
E. Ampellio , P. Gabrielli , B. Gjorgiev , G. Sansavini -
Comparison of the optimal risk-based design of planar RC frames with different aspect-ratios under progressive collapse
L. da Rosa Ribeiro , A. Teófilo Beck , F. Parisi , H. Machado Kroetz -
Robust Optimization of Wave Energy Converter Parks
M. Gambarini
MS Corresponding Organizer:
Dr.
Mohsen Mirkhalaf
(University of Gothenburg)
Chaired by:
Dr. Mohsen Mirkhalaf
(University of Gothenburg)
,
Dr. Iuri Rocha
(Delft University of Technology)
-
Machine-Learning-Based Surrogate Material Models For Elasto-Plasticity And Elasto-Damage
C. Fricke , M. Luxner , L. Peyker , L. Mitrovic , H. Pettermann -
Effective application of hybrid material modeling for topology optimization of multiphase hyperelastic composites
H. Vijayakumaran , J. Russ , G. Paulino , M. Bessa -
A Microstructure-based Graph Neural Network for Accelerating Multiscale Simulations
J. Storm , I. Rocha , F. van der Meer -
Improving the Production Accuracy of the Tailored Fiber Placement Process Through a Machine-Learning Algorithm
L. Bittrich , E. de Menezes , M. Woestmann , A. Miene , L. Echer , A. Spickenheuer -
Machine learning model for correlating microstructural features and macroscopic properties of heterogeneous composites
C. Shen , H. Zhao , R. Mu , A. Wang , K. Wang
MS Corresponding Organizer:
Dr.
Igor A. Rodrigues Lopes
(INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering)
Chaired by:
Dr. Igor A. Rodrigues Lopes
(INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering)
,
Dr. Stefanos Papanicolopulos
(University of Edinburgh)
-
Second-order homogenization with body-forces for non-linear cellular- and meta-materials
L. Wu , J. Segurado , M. Mustafa , L. Noels -
Homogenisation of Locally Resonant Acoustic Metamaterials Including Dissipation
R. Liupekevicius , H. Van Dommelen , M. Geers , V. Kouznetsova -
Multi-Scale Modelling of Metamaterials via Second-Order Computational Homogenisation
W. Santos , I. Lopes , F. Andrade Pires , S. Proença -
Computational homogenization and efficient solution of higher-order continua
C. Hesch , F. Schmidt , S. Schuß -
An Efficient Localized Model Order Reduction Framework for the Shape Optimization of Additively Manufactured Lattice Structures
P. Diercks , K. Veroy , A. Robens-Radermacher , J. Unger -
Fractal continuum approach for self-similar beam bending
A. Kryvko , D. Samayoa-Ochoa , L. Damián-Adame
MS Corresponding Organizer:
Prof.
Fleurianne Bertrand
(TU Chemnitz)
Chaired by:
Prof. Fleurianne Bertrand
(TU Chemnitz)
,
Dr. Jakub Both
(University of Bergen)
-
Structure preserving approximation of dynamic poroelasticity
M. Bause , M. Anselmann , N. Margenberg -
A Least-Squares Finite Element Method for TPM
F. Bertrand , M. Brodbeck , T. Ricken , H. Schneider -
An Eigenvalue Problem in Poromechanics
F. Bertrand , Ö. Türk -
Convergence Analysis of Multirate Fixed-Stress Split with Contact Mechanics
T. Almani , O. Hamid , K. Kumar
MS Corresponding Organizer:
Ms.
Francesca Marcon
(Politecnico di Torino)
Chaired by:
Ms. Francesca Marcon
(Politecnico di Torino)
,
Mr. Stefano Bonetti
(Politecnico di Milano)
-
Keynote
Virtual Element Mesh Refinement Methods for Large-Scale Flow Simulations in DFNs
S. Berrone , F. Vicini -
A Hybrid High-Order Method for Phase-Field Modeling of Fracture Propagation
J. Coatleven , A. Crippa , D. Di Pietro , N. Guy , S. Yousef -
A VEM-fully discrete polytopal scheme with bubble stabilisation for mixed-dimensional models with frictional contact at matrix--fracture interfaces
J. Droniou , G. Enchery , I. Faille , A. Haidar , R. Masson -
Hybrid high-order methods for elasto-acoustic wave propagation in the time domain
R. Mottier , A. Ern , L. Guillot -
A lowest order stabilization-free mixed Virtual Element Method
A. Borio , C. Lovadina , F. Marcon , M. Visinoni
MS Corresponding Organizer:
Prof.
Antonia Larese
(University of Padua)
Chaired by:
Prof. Massimiliano Cremonesi
(Politecnico di Milano, ITALY)
,
Prof. Antonia Larese
(University of Padua)
-
Semi-implicit Material Point Method with Fractional-step Method for Unsaturated Soil
S. Hidano , Y. Yamaguchi , S. Takase , S. Moriguchi , K. Kaneko , K. Terada -
On boundary condition for modelling infiltration and potential seepage with material point method
L. Aviles , G. Di Carluccio , J. A. Freixa , N. Pinyol -
MPM analyses of impacts of dry and saturated granular masses against rigid obstacles
M. Zerbi , P. Marveggio , C. di Prisco -
Stabilized mixed formulation for an implicit Material Point Method for viscoplastic fluids
L. Moreno , A. Larese , A. Contri , R. Wuechner -
Multiscale Approach for the Simulation of Natural Hazards on Structures
A. Katili , V. Singer , M. Fois , K. Bletzinger , A. Larese -
SPH-DEM Modeling of Superelevation in Debris and Mud Flows
P. Friess , H. Vicari , B. McArdell , A. Åberg , J. Gaume
MS Corresponding Organizer:
Dr.
Sonja Hellebrand
(University of Duisburg-Essen)
Chaired by:
Prof. Johanna Waimann
(Ruhr-Universität Bochum )
,
Dr. Sonja Hellebrand
(University of Duisburg-Essen)
-
On the Identification of Best Fitting Probability Density Functions for Fiber Orientation in Paper Network Modelling
G. Kloppenburg , X. Li , A. Dinkelmann , H. Finckh , J. Neumann , J. Simon -
Multi-phase-field Modeling and Development of High-performance Computing Scheme for Realistic Prediction of Sintered Microstructures
A. Nakazawa , S. Sakane , T. Takaki -
Harnessing Generative AI for Modelling Mesoporous Materials: An Aerogel Use Case
P. Pandit , S. Kanagasenthinathan , A. Rege -
Modeling Fiber Orientation in Microstructures Using Statistical Information From Paper Samples
J. Pfeifer , G. Kloppenburg , S. Kochersperger , S. Schabel , I. Kirsten , A. Dinkelmann , H. Finckh , J. Neumann , J. Simon -
Generation of representative volume elements from grain boundary networks in MCRp
A. Safi , P. Seibert , T. Schwartz , M. Kästner , B. Klusemann -
Realistic RVEs by microstructure reconstruction: quasi-Newton optimization vs. sequential gradient projection
P. Seibert , A. Raßloff , K. Kalina , M. Kästner
MS Corresponding Organizer:
Prof.
Rosaire Mongrain
(McGill University)
Chaired by:
Prof. Rosaire Mongrain
(McGill University)
,
Prof. Lisa Prahl Wittberg
(FLOW, Dept. Engineering Mechanics, Royal Institute of Technology (KTH))
-
Software Implementation to Simulate the Hemodynamics in Patient-Specific Coronary Arteries: A Review from the Past to the Present
S. Pinto -
Stabilized Finite Element Simulation of the Left Ventricle Under LVAD Support
M. Schuster , N. Hosters , M. Behr -
Simulation of Synthetic Mitral Valve Mechanics Using an Experimentally Validated Finite Element Model
S. Javadpour , F. O'Brien , C. Conway -
Optimization of a Roller Pump Using a 2D Numerical Simulation Model
E. Knoche , M. Heinrich , R. Schwarze -
Computational Fluid Dynamics Analysis of Femoro-Femoro Cannulation Performance for Extracorporeal Membrane Oxygenation
H. Hörwing , L. Parker , L. Broman , L. Prahl Wittberg -
Extra Corporeal Membrane Oxygenation Support For Perfusion In Cardiac Shock: A Computational Analysis
E. Vignali , E. Gasparotti , M. Mazzoli , D. Haxhiademi , S. Celi
MS Corresponding Organizer:
Eng.
Pedro Miguel Godinho
(Vienna University of Technology)
Chaired by:
Eng. Pedro Miguel Godinho
(Vienna University of Technology)
,
Prof. Jaan Simon
(University of Wuppertal)
-
The elastic stiffness tensor of cellulosic fibers
C. Czibula , M. Ulz , U. Hirn , K. Koski -
A Continuum Model for Layered Two-dimensional Materials
H. Liu , Y. Chen , Y. Liu -
Non-ageing, Linear Viscoelasticity of Paper Sheets: A Continuum Micromechanics Approach
P. Jesus de Sousa Godinho -
Thermal Conductivity of Nanopaper Films: A Continuum Micromechanics Approach
P. Jesus de Sousa Godinho
MS Corresponding Organizer:
Prof.
Chenfeng Li
(Swansea University)
Chaired by:
Prof. Chenfeng Li
(Swansea University)
-
LMP vs SPH Solver Comparison in Dispersed Flows of Discrete Particles Solutions
G. Davi , T. Fabbri , S. Holzknecht , A. Muscio -
CFD and Experimental Analysis of Sedimentation Velocity of Anaerobic Granules from an EGSB Reactor
C. D'Bastiani , D. Kennedy , A. Reynolds -
Thinning-induced breakup of a gravitational liquid jet driven by varicose perturbations
A. Della Pia , M. Chiatto , L. de Luca -
Water-Gas-Oil Flows Including Foam in Heterogeneous Porous Media
F. de Paula , I. Igreja , G. Chapiro -
Power-law model for wind-driven flows in homogeneous semienclosed basins
V. Llorente , E. Padilla , M. Díez-Minguito
MS Corresponding Organizer:
Ms.
Mareike Thiedeitz
(ETH Zurich)
Chaired by:
Dr. Jithender Timothy
(Technical University of Munich)
,
Ms. Mareike Thiedeitz
(ETH Zurich)
-
Materials Engineering using Generative Models and Multiscale Simulations
J. Timothy -
Modeling the Early-Age Properties of Cement Paste using Thermodynamics and Multi-Scale Homogenization
E. Jägle , J. Timothy , D. Jansen , A. Machner -
Use of Stochastic Fields and Mesoscale to Model the Effect of Material Heterogeneity on the Thermomechanical Response of Concrete
M. Gimenes , P. Cleto , O. Manzoli -
Impact of Interparticle Forces on the Rheological Behavior of Micro Particle Suspensions with Unresolved Coupled CFD-DEM Simulations
D. Ivanov , M. Eslami Pirharati , I. Mai , C. Schilde -
Simulation of time-dependent cement paste flow: Analysis of transient phenomena during slow flow
M. Thiedeitz , J. Timothy
MS Corresponding Organizer:
Dr.
Alexander Ehret
(Empa, Swiss Federal Laboratories for Materials Science and Technology)
Chaired by:
Dr. Alexander Ehret
(Empa, Swiss Federal Laboratories for Materials Science and Technology)
-
CFD-based design and performance analysis of a nose-on-chip device
E. Fasil , R. Lamioni , A. Mariotti , E. Brunazzi , C. Galletti , M. Salvetti , S. Danti -
Investigation of Mechanisms Underlying Stiffness Change in Prostate Cancer Cells
L. Jadrna , J. Gumulec , J. Bursa -
Interplay of active self-organization in dense nematic cytoskeleton structure and cellular shape changes
W. Mirza , A. Torres-Sánchez -
Stability and instability of catch-bonded polymer networks
J. van der Gucht , J. Ruiz Franco -
Endothelial Deformation and Fracture Analysed by Fibre Network Models
R. Jakob , Y. Choi , C. Giampietro , E. Mazza , A. Ehret -
Microstructure-Based Constitutive Modelling Of Soft Biological Tissues
C. Sheridan , J. Concannon
Marc Geers
MS Corresponding Organizer:
Prof.
Marc Geers
(Eindhoven University of Technology)
Chaired by:
Prof. Javier Oliver
(Technical University of Catalonia (Barcelona/Tech))
-
Particle Based Methods For Additive Manufacturing And Continuum Fracture
M. Geers , S. Sperling , B. Dorussen , J. Hoefnagels , J. Remmers
Maurizio Quadrio
MS Corresponding Organizer:
Mr.
Maurizio Quadrio
(Politecnico di Milano)
Chaired by:
Prof. Pedro Diez
(CIMNE/UPC)
Trond Kvamsdal
MS Corresponding Organizer:
Prof.
Trond Kvamsdal
(Norwegian University of Science and Technology (NTNU))
Chaired by:
Prof. Alexander Popp
(University of the Bundeswehr Munich)
-
Predictive Digital Twins
T. Kvamsdal
Daniel Reckzeh
MS Corresponding Organizer:
Mr.
Daniel Reckzeh
(Airbus)
Chaired by:
Prof. Jacques Periaux
(cimne)
MS Corresponding Organizer:
Dr.
Marco ten Eikelder
(TU Darmstadt)
Chaired by:
Prof. Laura De Lorenzis
(ETH Zurich)
-
New horizons in corrosion modelling: phase field models for pitting and stress corrosion cracking
E. Martinez-Paneda -
Virtual element methods for high-order phase-field modeling of dynamic fracture
Y. Leng -
Dual-Mesh Discretization For Phase-Field Fracture Method
T. Jarak , K. Jukić , Z. Tonković , A. Lorenzana Iban -
A combined volumetric-deviatoric and spectral decomposition-based phase-field model for brittle fracture
M. Rahaman , A. Behera , A. Pillai -
Phase-Field Modelling of Hydraulic Fracturing in Porous Media
S. Shahoveisi , M. Vahab , S. Eisenträger , B. Shahbodagh , N. Khalili -
An Adaptive Time-Discretization Method Suitable for Phase-Field Models of Brittle Fracture
F. Rörentrop , J. Mosler
MS Corresponding Organizer:
Dr.
Filipe Pereira
(Los Alamos National Laboratory)
Chaired by:
Dr. Andrea Ferrero
(Politecnico di Torino)
-
Keynote
The Merging of Symmetries and the Germano Identity - a Path to Physics-based SGS Models
M. Oberlack , D. Klingenberg -
Mixed Averaging Procedures
M. Errante , M. Klein , A. Ferrero , F. Larocca , G. Scovazzi , M. Germano -
Coarse Grain Prediction of Transition
D. Israel -
Investigation of length scale definition influence in LES models
E. Di Lavore , J. Ruano , A. Oliva , X. Trias
MS Corresponding Organizer:
Prof.
Jose Madeira
(IDMEC, IST, Universidade de Lisboa)
Chaired by:
Dr. Aurelio Araujo
(IDMEC)
,
Dr. Erin Kuci
(CENAERO)
-
Investigating the Merits of Double-Double and Quad Composites Structural Optimization for Aeronautic Structures
A. Garcia Pis , C. Gogu , S. Grihon , L. Michel , S. Coniglio -
Aero-Structural Design of a Medium-Altitude Medium-Endurance Fixed Wing UAV
P. Cardoso , A. Marta , N. Matos -
Multidisciplinary Node-Based Shape Optimization of Automotive Parts for Manufacturability
G. Barrón Loeza , K. Bletzinger , M. Hojjat -
Levelset XFEM Topology Optimization for Additively Manufactured Morphing Wing Structures
E. Kuci , J. Leclerc -
Optimization of Grid-Stiffened Composite Cylindrical Panels for Buckling and Free Vibration
M. Mobasheri Zafarabadi , A. Araujo , M. Aghdam
MS Corresponding Organizer:
Prof.
Mokarram Hossain
(Swansea University)
Chaired by:
Prof. Daniel Garcia-Gonzalez
(Universidad Carlos III de Madrid)
,
Dr. Sergey Kozinov
(Ruhr University Bochum)
-
A Dynamic Finite Element Framework for Modeling Hard-Magnetic Soft Materials
D. Sharma , A. Sharma -
Viscoelastic Magnetorheological Elastomer-Based Laminate for Tuneable Vibration Absorber
M. Ruggieri , J. Ciambella , S. Rudykh , G. Tomassetti -
An electroelastic Kirchhoff rod theory incorporating free space electric energy
D. Barreto , A. Kumar -
Bayesian Inference For Anisotropic Soft Tissue Characterization Using Full-Field Optical Data
A. Elouneg , H. Rappel , A. Lejeune , J. Chambert , S. Bordas , E. Jacquet -
Dynamic Actuation Modes in Magneto-Responsive Bistable Structures: A Rate-Dependent Approach
C. Perez-Garcia , J. Aranda-Ruiz , M. Lopez-Donaire , R. Zaera , D. Garcia-Gonzalez
MS Corresponding Organizer:
Dr.
Andreas Lundbäck
(Luleå University of Technology)
Chaired by:
Prof. Jesper Hattel
(Danmarks Tekniske Universitet (DTU))
,
Dr. Andreas Lundbäck
(Luleå University of Technology)
-
Keynote
Original Eigenstrain Framework Combined with Machine Learning for Fast Residual Stress and Distortion Prediction in LPBF Parts
P. Markovic , E. Mazza , E. Hosseini -
Reduced Order Model for Temperature Field Simulation of Wire Arc Additive Manufacturing
D. Strobl , J. Unger , C. Ghnatios , A. Pittner , M. Rethmeier , A. Robens-Radermacher -
Fast Thermal History Prediction During Additive Manufacturing Processes Using Deep Learning Methodologies
L. Salesses , L. Arbaoui , A. François , C. Sainvitu -
Accelerated Additive Manufacturing Simulation Through Inherent Strains Meta-Models Trained With Generic Databases
H. Hernandez , N. Poletz , T. Van Hoof -
Data-driven surrogate modelling of residual stresses in Laser Powder-Bed Fusion
L. Lestandi , J. Wong , G. Dong , M. Jhon
MS Corresponding Organizer:
Dr.
Michael Abdemalik
(Eindhoven University of Technology)
Chaired by:
Mr. Teddy Pichard
(École polytechnique)
,
Dr. Michael Abdemalik
(Eindhoven University of Technology)
-
Exploiting Tensor Structure in Kinetic Equations: General Framework
M. Abdelmalik , R. Hiemstra , T. Keßler -
Exploiting Tensor Structure in Kinetic Equations: High Performance Aspects
M. Abdelmalik , R. Hiemstra , T. Kessler -
Magnetized Plasma Simulations with High-Order Implicit-Explicit Time Integrators
D. Ghosh , M. Dorf , M. Dorr -
A Grad-Like Expansion of the Hyperbolic Quadrature Method of Moments for Multidimensional Kinetic Equations
R. Fox , F. Laurent -
Reduced models for parietal fluxes in hypersonic rarefied flows: from bridging functions to machine learning models
M. Schouler , Y. Prévereaud , L. Mieussens -
Interpolative-Based Maximum-Entropy Moment Closures for Predicting Non-Gray Radiative Heat Transfer with Application to Sooting Flames
J. Sarr , C. Groth
MS Corresponding Organizer:
Prof.
Fadi Aldakheel
(Leibniz Universität Hannover)
Chaired by:
Dr. Yousef Heider
(Leibniz Universität Hannover)
,
Prof. Oliver Weeger
(TU Darmstadt)
-
Physically enhanced neural networks: Application to nonlinear viscoelasticity
L. Maurer , S. Eisenträger , D. Juhre -
A Neural Network Strategy for the Modelling of Inelastic Solid Materials via Gradient-Free Optimisation
E. Muttio , R. Alhayki , W. Dettmer , D. Perić -
Microstructural Characterization in Aerogel Modeling through Deep Symbolic Regression
R. Abdusalamov , R. Chandrasekaran , M. Itskov -
Exploring CNN Based Architectures for Structure to Property Mapping of 2D Micro-Architected Materials
J. Bowbrick Smith , M. Whiting , T. Chatterjee , K. Bandara , M. Weismann , H. Attar , A. Harris , I. Mohagheghian -
Concurrent Multiscale Modelling of Boundary Lubrication, Enabled by Machine Learning
H. Holey , P. Gumbsch , L. Pastewka
MS Corresponding Organizer:
Prof.
Stefan Turek
(TU Dortmund University)
Chaired by:
Prof. Stefan Turek
(TU Dortmund University)
,
Prof. Axel Klawonn
(Universität zu Köln)
-
Keynote
Nonlinear domain decomposition methods combined with deep learning
A. Klawonn , M. Lanser , J. Weber -
Parallel implementation of nonlinear Schwarz domain decomposition methods
K. Ho , A. Klawonn , M. Lanser -
Parallel Scalable Domain Decomposition Methods for Incompressible Fluid Flow Problems
A. Heinlein , A. Klawonn , J. Knepper , L. Saßmannshausen -
Fast and Robust Overlapping Schwarz methods in FEATFLOW
S. Köhler , O. Rheinbach -
Fast Semi-Iterative Finite Element Poisson Solvers for Tensor Core GPUs
D. Ruda , S. Turek , D. Ribbrock
MS170B Recent Advances in Unfitted Finite Element Methods: Analysis, Algorithms, and Applications II
MS Corresponding Organizer:
Dr.
Andre Massing
(Norwegian University of Science and Technology)
Chaired by:
Prof. Mats G. Larson
(Umea University)
,
Prof. Guglielmo Scovazzi
(Duke University)
-
Keynote
Analysis of an Eulerian finite element method for a fluid problem in a deforming volume
M. Neilan , M. Olshanskii -
Geometrically higher order unfitted space-time methods for PDEs on moving domains
F. Heimann , C. Lehrenfeld , J. Preuß -
Unfitted finite element methods for axisymmetric two-phase flow
H. Garcke , R. Nürnberg , Q. Zhao -
A conservative cut finite element discretization of the surfactant transport equation
S. Myrbäck , S. Zahedi -
Towards DWR Adaptivity and Multigrid Methods for Flow Simulation on Evolving Domains
M. Anselmann , M. Bause , M. Bruchhäuser , N. Margenberg
MS Corresponding Organizer:
Ms.
Martha Kalina
(TU Dresden)
Chaired by:
Prof. Fadi Aldakheel
(Leibniz Universität Hannover)
,
Ms. Martha Kalina
(TU Dresden)
-
Keynote
Modeling of damage in fiber-reinforced high-performance concrete at low cycle fatigue using a phase-field regularization
J. Schröder , M. Pise , D. Brands -
Phase-field modeling of the cracking behavior of concrete at the mesoscale
A. Mishra , P. Carrara , G. Michele , L. De Lorenzis -
Cracking in Reinforced Concrete Elements: a Phase Field Approach
L. Mingazzi , F. Freddi -
Investigation of Microscale Fracture Opening in Host Inclusion Systems
B. Puhan , M. Alvaro , A. Patton , M. Mazzucchelli , A. Reali , S. Morganti -
A Finite Strain Gradient-Enhanced Micropolar Hyperelasto-Plasticity Continuum Approach for Localized Failure in Cohesive-Frictional Materials
M. Neuner , S. Abrari Vajari , P. Arunachala , C. Linder , G. Hofstetter
MS Corresponding Organizer:
Dr.
Michele Terzano
(Graz University of Technology)
Chaired by:
Dr. Michele Terzano
(Graz University of Technology)
,
Prof. Gerhard Holzapfel
(Graz University of Technology)
-
Keynote
Local Micromorphic Non-affine Anisotropy with Applications to Biological Tissue
S. Skatulla , C. Sansour , G. Limbert -
Constitutive Foundation of Nonlinear Elasticity in Soft Tissue
S. Cardona , B. Fereidoonnezhad , M. Peirlinck -
Fourier Transform-Based Algorithm for the Quantification of the Spatial Orientation Distribution of 3D Fiber Networks
R. Alberini , A. Spagnoli , M. Sadeghinia , B. Skallerud , M. Terzano , G. Holzapfel -
A New Way to Look at Elastic Problems : a Visco-hypoelastic Model to Describe Nano-mechanics of Collagen Fibrils
Y. Chiang , C. Hellmich , P. Thurner -
A Nonlinear Viscoelastic Model for Soft Fibre-Reinforced Biological Tissues with Anisotropic Evolution of Viscous Strain
G. Lucci , J. Ciambella , P. Nardinocchi
MS Corresponding Organizer:
Prof.
François Jouve
(Université Paris Cité)
Chaired by:
Mr. Alex Ferrer
(CIMNE, Barcelona)
,
Dr. Samuel Amstutz
(Avignon Université)
-
Multiscale(FE-FFT) Phase-field Topology Optimization for Architected Cellular Materials
B. Yaraguntappa , A. Krischok , M. Keip -
Shape Optimization with CutFEM with a Novel Level-Set Reinitialization Technique
A. El Bachari , S. Claus , J. Rannou , V. Yastrebov , P. Kerfriden -
Topological Derivative‐Based Heat Sink Design with Temperature Constraints
G. Andrade , A. Novotny , A. Laurain -
One-Shot Optimization for the Inverse Design of a Quasi 1-D De Laval Nozzle
L. Zampini , V. Georgopoulos , G. Coussement , T. Verstraete -
Topology Optimization Assisted by Automatic Level Set-Fitted Polygonal Meshes
N. Ferro , S. Micheletti , N. Parolini , S. Perotto , M. Verani , P. Antonietti -
One-Shot Optimization for the Inverse Design of a 2D de Laval Nozzle
L. Zampini , G. Coussement , T. Verstraete
MS Corresponding Organizer:
Prof.
Alessandro Reali
(University of Pavia)
Chaired by:
Prof. Trond Kvamsdal
(Norwegian University of Science and Technology (NTNU))
,
Prof. Giancarlo Sangalli
(University of Pavia, Italy)
-
Thermo- and Chemo-elastic Beam Modeling and Simulation with Isogeometric Collocation Methods
J. Alzate Cobo , O. Weeger -
An efficient isogeometric formulation for the analysis of geometrically exact viscoelastic beams
G. Ferri , D. Ignesti , E. Marino -
Topology optimization of curved thick shells using level set method and multi-patch isogeometric analysis
F. Hubner , A. Constantinescu , M. Zarroug , H. Naceur -
An isogeometric nonlinear formulation for shear- and torsion-free rods using outlier removal and robust time integration
T. Nguyen -
An Objective FE-Formulation for Cosserat Rods based on the Spherical Bézier Interpolation
L. GRECO , A. CAMMARATA , D. CASTELLO , M. CUOMO
MS Corresponding Organizer:
Prof.
Marco D. de Tullio
(Politecnico di Bari)
Chaired by:
Mr. Alessandro Nitti
(Polytechnic University of Bari)
,
Prof. Marco D. de Tullio
(Politecnico di Bari)
-
Multiphysics, multiscale, and computational models for simulating the cardiac function
L. Dede' -
A new method to compute the fluid-structure interaction of neutrally-buoyant particles of arbitrary shape
M. Schenk , M. Garcia-Villalba , M. Uhlmann , M. Moriche -
Numerical investigation on the aerodynamic performance of a bioinspired micro-scale wind turbine
J. Catalán , G. Arranz , M. Moriche , M. Guerrero-Hurtado , M. García-Villalba , O. Flores -
Aereodynamics of Bioinspired Flying Seeds
A. Lolli , G. Corsi , A. DeSimone -
Self-sustained flapping of wall-mounted valve leaflets in a three-dimensional channel
J. Wang , A. Nitti , M. de Tullio
MS Corresponding Organizer:
Phd.
Nicolas Valle
(Technische Universiteit Delft)
Chaired by:
Prof. F.Xavier Trias
(Technical University of Catalonia)
,
Phd. Nicolas Valle
(Technische Universiteit Delft)
-
A Spectral Difference Discretisation of the Five-equation Model for the Simulation of Compressible Two-Phase Flows
N. Tonicello , G. Lodato , M. Ihme -
Computation of low Mach number multiphase flows using five-equation model
G. Bharate , J. MANDAL -
Simulating Two-Phase Flow with a Sharp, Structure-Preserving Two-Velocity Model
A. Veldman , R. Remmerswaal -
Wave growth rate estimations using diffusive interface simulations
M. Loft , T. Rung -
A Synthetic Bubble Model as Inlet for Fluid-Structure Interaction Simulations with Two-Phase Flow
H. Dolfen , J. Degroote -
Dynamics of a Taylor bubble in counter-current flow: transition from laminar to turbulent
B. Mikuž , J. Kren , E. Frederix , I. Tiselj
MS Corresponding Organizer:
Dr.
Konrad Perzyński
(AGH University of Krakow)
Chaired by:
Dr. Konrad Perzyński
(AGH University of Krakow)
-
Influence of rate-dependence on unstable material response in large strain thermoplasticity
M. Mucha -
Numerical Simulation of Ice Melting in Fluid Flows
R. Yang , R. Verzicco , D. Lohse -
Mechanical properties of heart failure with preserved ejection fraction: phenotypic analysis and therapeutic device investigation
J. Weissmann -
A high-order continuous Lagrange--Galerkin method for compressible flows
M. Colera , J. Carpio , R. Bermejo -
Mathematical and Numerical Modeling of the Heart Function: Integrating Electrophysiology, Mechanics and Fluid Dynamics
M. Bucelli -
Interaction between a submarine and a far-field underwater explosion with a transient iterative FEM-BEM coupling
A. Nassor , M. Bonnet , S. Chaillat
MS Corresponding Organizer:
Dr.
Alberto Barontini
(University of Minho, ISISE, ARISE)
Chaired by:
Dr. Enrique García-Macías
(Universidad de Granada)
,
Dr. Alberto Barontini
(University of Minho, ISISE, ARISE)
-
Keynote
Surrogate models as the key to inject digital twins within the statistical pattern recognition SHM paradigm
E. García Macías -
Meta-Model Assisted Pattern Recognition for Real-Time Identification of Roadway Bridges: a Preliminary Study
E. Tomassini , E. García-Macías , I. Venanzi , F. Ubertini -
Leveraging advanced numerical calibration to filter out temperature effects on vibration-based monitoring data: application to the Mogadouro clock tower
A. Barontini , D. Pellegrini , F. Testa , M. Girardi , M. Masciotta , N. Mendes , C. Padovani , L. Ramos , P. Lourenço -
Combination of FEM and machine learning models for enhanced dam safety assessment
F. Salazar , J. Irazábal , N. Silva-Cancino , D. Vicente
MS Corresponding Organizer:
Dr.
Isabelle RAMIERE
(CEA Cadarache)
Chaired by:
Dr. Isabelle RAMIERE
(CEA Cadarache)
,
Prof. David Ryckelynck
(Mines Paris PSL - Armines)
-
A Comprehensive Study on the Benefits of a Multiscale Approach in Model-Order Reduction for Frictional Contact Problems
D. Zeka , P. Guidault , D. Néron , M. Guiton -
Efficient Hyper-Reduced Order Modelling of Mixed Contact Problems defined on Non-matching grids
I. Ramière , S. Le Berre , D. Ryckelynck -
Development of a Simplified Model for the Analysis of Bolted Assemblies under Extreme Loadings
Q. Lançon , P. Guidault , P. Boucard , N. Vallino -
A Small Sliding Beam-to-beam Contact Element for the Simulation of Overhead Conductors Under Tension and Bending
K. Aït Ammar , P. Guidault , P. Boucard , J. Said , F. Hafid -
Micro-scale analysis of rough surfaces using non-conforming meshes
M. Oliveira , D. Neto , L. Menezes
MS Corresponding Organizer:
Dr.
Esther Andrés Pérez
(INTA)
Chaired by:
Dr. Domenico Quagliarella
(CIRA)
,
Dr. Esther Andrés Pérez
(INTA)
-
Latent Regression of Transonic Wing Pressure distributions
V. Francés , A. Solera-Rico , J. Nieto-Centenero , E. Andrés , C. Sanmiguel Vila , R. Castellanos -
Physics-informed Machine Learning for Surrogate Modelling and Design Optimization
Y. Sun -
A Multi-Fidelity Aerodynamic Shape Design Optimization Procedure Using Physically Informed Machine Learning
D. Quagliarella -
Integrating Dimensionality Reduction and Bayesian Regression in a Reduced-Order Modeling Framework for Atmospheric Boundary Layer Flows Simulations
H. Li , L. Cotteleer , A. Gambale , A. Parente
MS Corresponding Organizer:
Dr.
Massimo Carraturo
(University of Pavia)
Chaired by:
Prof. Simone Morganti
(University of Pavia)
,
Dr. Massimo Carraturo
(University of Pavia)
-
Potential and limits of modelling as-designed AlSi10Mg lattice structures in 4 different loading conditions
U. Gebhardt , T. Gustmann , L. Giebeler , F. Hirsch , J. Hufenbach , M. Kästner -
A Game for Multi-Scale Topology Optimization of Static and Dynamic Compliances of Schwarz-D Lattice Structures
N. Strömberg -
Efficient Mechanical Design of Lattice Metamaterials: a Multiscale Homogenization-based Approach
L. Cibrario , C. Gastaldi , I. Cozza , C. Delprete -
Accelerating the simulation of Mechanical Metamaterials with Reduced Order Modeling and Domain Decomposition Methods
F. Betti , P. Antolin Sanchez , A. Buffa
MS Corresponding Organizer:
Dr.
Maria Han Veiga
(Ohio State University)
Chaired by:
Dr. Davide Torlo
(Università di Roma La Sapienza)
,
Dr. Maria Han Veiga
(Ohio State University)
-
Matrix-Free Finite Element Methods for Lagrangian Hydrodynamics
N. Morgan , S. Tokareva , S. Walton -
Active flux for triangular meshes for compressible flows problems
R. Abgrall , J. Lin , Y. Liu -
Novel well-balanced continuous interior penalty stabilizations
L. Micalizzi -
Hybrid-Trefftz Finite Elements for Non-Homogeneous Wave Propagation Problems
I. Moldovan , S. Silva Pinto , D. Bendea -
Semi-Implicit Numerical Scheme for Hyperbolic Problems
R. Abgrall , S. Del Pino , A. Drouard , E. Labourasse -
Implicit High-Order Shock Tracking using an Extended Discontinuous Galerkin method
J. Vandergrift , F. Kummer
MS Corresponding Organizer:
Mr.
Matteo Torzoni
(Politecnico di Milano)
Chaired by:
Mr. Matteo Torzoni
(Politecnico di Milano)
,
Dr. Marco Tezzele
(Emory University)
-
Markov Chain Monte Carlo on Matrix Manifolds for Probabilistic Model Order Reduction
A. Vizzaccaro , M. Likkeggard , T. Dodwell -
Graph Neural Network with a physics-inductive bias for Multi-body Dynamical Systems
V. Sharma , O. Fink -
PDE-Constrained manifold Gaussian Processes for High-Dimensional Problems
W. Yan , M. Guo -
Neural Networks Based Surrogate Modeling for Sensitivity Estimation of MEMS Accelerometers Using Electric Stimuli
F. Zacchei , A. Manzoni , A. Frangi -
Multi-fidelity Modelling for Digital Twins of Fast Processes
M. Dodt , S. Marelli , A. Persoons , M. Faes , B. Sudret , D. Moens
MS Corresponding Organizer:
Dr.
Federico Pichi
(SISSA)
Chaired by:
Dr. Federico Pichi
(SISSA)
,
Dr. Nicola Rares Franco
(MOX, Politecnico di Milano)
-
Factorized Fourier neural operator (F-FNO) metamodel of 3D seismic elastic wave propagation, improved by transfer learning.
F. Lehamnn , F. Gatti , M. Bertin , D. Clouteau -
Entropy Stable Model Reduction of Hyperbolic Systems on Nonlinear Manifolds
R. Klein , B. Sanderse , R. Pecnik , P. Costa , R. Henkes -
A continuous geometry-aware DL-ROM for nonlinear PDEs in parametric domains
S. Brivio , S. Fresca , A. Manzoni -
Optimal Transport-Inspired Model Order Reduction: Leveraging Wasserstein-Based Kernel and Shifted POD
M. Khamlich , G. Rozza , F. Pichi -
Real-Time Simulation of Plastic Deformation Using Long Short-Term Memory Multi-Task Neural Networks
R. Schmeitz , J. Remmers , O. Mula , O. van der Sluis -
An adaptive finite elements - neural network method applied to a parametric Stefan problem
A. Caboussat , M. Girardin , M. Picasso
MS Corresponding Organizer:
Mr.
Hervé Moulinec
(Laboratoire de Mecanique et d’Acoustique / CNRS)
Chaired by:
Dr. Ricardo Lebensohn
(Los Alamos National Laboratory)
-
Is FFT-based Homogenization Limited to Regular Meshes?
M. Kabel , M. Schneider -
Numerical homogenization by an adaptive Fourier spectral method on non-uniform grids using optimal transport
C. Bellis , R. Ferrier -
Fourier Transform approach to boundary domain integral equations with domain decomposition and adaptive reference parameters
Q. To -
The elastic properties of fiber-reinforced materials with imperfect interfacial bondings: analytical approximations versus full-field simulations
V. Gallican -
FFT-based Model of Hydroelectric Dams under Alkali-Silica Reaction
L. Fourel , J. Molinari
MS Corresponding Organizer:
Dr.
Oindrila Kanjilal
(Engineering Risk Analysis Group)
Chaired by:
Dr. Iason Papaioannou
(Technical University of Munich)
,
Dr. Oindrila Kanjilal
(Engineering Risk Analysis Group)
-
Life-Cycle Maintenance Optimization of Bridge Networks Against Seismic Risks Through Hierarchical Deep Reinforcement Learning
Z. Metwally , C. Andriotis -
Structural design optimization under uncertainty by cross entropy-based importance sampling
O. Kanjilal , I. Papaioannou , D. Straub -
Resilience-Informed Design Optimization of Dolphin Structures of Long-Span Bridges under Ship-Collision Hazards
S. Lim , J. Song , H. Kim
MS Corresponding Organizer:
Dr.
Mohsen Mirkhalaf
(University of Gothenburg)
Chaired by:
Dr. Iuri Rocha
(Delft University of Technology)
,
Dr. Ramin Bostanabad
(UCI)
-
Data augmentation for deep-learning modelling of composite materials
P. Uvdal , H. Cheung , M. Mirkhalaf -
Data-driven Permeability Prediction of 3D Fibrous Microstructures
D. Natarajan , T. Schmidt , S. Cassola , M. Nuske , M. Duhovic , D. May , A. Dengel -
Keynote
Machine Learning-Accelerated Predictions of Design Allowable of Composite Laminates
L. Fonseca , J. Ferreira , I. Lopes , J. Esteves , F. Danzi , C. Furtado
MS Corresponding Organizer:
Dr.
Igor A. Rodrigues Lopes
(INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering)
Chaired by:
Dr. Igor A. Rodrigues Lopes
(INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering)
,
Prof. Christian Hesch
(University of Siegen)
-
Shared Degrees of Freedom for Strain-gradient Mixed Elements
S. Papanicolopulos -
Modelling of Nonlocal Truss Structures in the Framework of Space-Fractional Continuum Mechanics
P. Stempin , W. Sumelka -
A parallel and staggered framework for the finite strain Cosserat-phase-field theory: application to microstructure evolution
C. Bovet , J. Doghman , A. Ask -
On modeling micro-scale strain gradient elastic adhesively bonded joints
M. Serpilli , R. Rizzoni , F. Lebon , M. Raffa , R. Rodrìguez-Ramos -
Two-Scale Geometric Modelling for Defective Media
M. Crespo , G. Casale , L. Le Marrec
MS Corresponding Organizer:
Prof.
Fleurianne Bertrand
(TU Chemnitz)
Chaired by:
Dr. Jakub Both
(University of Bergen)
,
Prof. Fleurianne Bertrand
(TU Chemnitz)
-
Higher-Order Iterative Decoupling for Poroelasticity
R. Altmann , A. Mujahid , B. Unger -
Solution Techniques for Poroelasticity that Preserve Linear and Angular Momentum
W. Boon , N. Franco , A. Fumagalli , P. Zunino -
Solution strategies to solve poroelasticity for complex grids
W. Boon , A. Fumagalli -
A decoupled solver for a novel stabilization scheme for Biot's model
A. Pe de la Riva , F. Gaspar , C. Rodrigo , J. Adler , X. Hu , L. Zikatanov -
Optimal control strategies to mitigate the intensity of the urban heat island in porous urban environments
M. Louaked -
Assessment of geological fault reactivation by CO2 injection using sequential coupling strategies
C. Mejia , J. Rueda , R. Quevedo , D. Roehl
MS Corresponding Organizer:
Ms.
Francesca Marcon
(Politecnico di Torino)
Chaired by:
Mr. Stefano Bonetti
(Politecnico di Milano)
,
Ms. Francesca Marcon
(Politecnico di Torino)
-
Isoparametric Virtual Element Methods
A. Cangiani , A. Dedner , M. Hubbard , H. Wells -
New results on adaptive virtual element methods
S. Berrone , C. Canuto , D. Fassino -
Virtual Element Method for large deformations of Single Layer Plates
R. Nochetto , G. Vacca , S. Yang -
A Hybrid Method for the Variable-density Navier-Stokes Equations
M. Dauphin , D. Di Pietro , J. Droniou -
A stabilization-free Virtual Element Method: main features and an application to a convection-diffusion eigenvalue problem
S. Berrone , A. Borio , F. Marcon , D. Mora
MS Corresponding Organizer:
Prof.
Antonia Larese
(University of Padua)
Chaired by:
Prof. Antonia Larese
(University of Padua)
,
Prof. Massimiliano Cremonesi
(Politecnico di Milano, ITALY)
-
Finite Element Simulation of a Rainfall Induced Shallow Landslide in an Experimental Hillslope with a Multiphase Porous Media Model
M. Lazari , M. Camporese , L. Sanavia -
Shallow Water Equations versus Zero-Inertia Approximation within a Geometrically Intrinsic Framework
E. Bachini , M. Camporese , A. Larese , M. Putti -
A Two-Fluid finite element formulation for solving hydraulic flows in high mountain areas
U. Chasco Goñi , R. Zorrilla , R. Rossi -
Modelling of Volcanic Plumes and Clouds: Implementation of Wind-caused Bending Effects and Coarse Particles in a Multi-GPU Accelerated LBM-WENO Code
R. Simionato , J. Lemus , C. Coreixas , J. Latt , C. Bonadonna -
Development of a multi-GPU Accelerated Code to Model the Complex Dynamics of Volcanic Plumes using the Lattice Boltzmann Method
J. LEMUS , R. Simionato , C. Coreixas , J. Lätt , C. Bonadonna -
Topography effects on landslide dynamics, generated tsunamis and seismic waves
A. Mangeney , M. Peruzzetto , F. Bouchut , G. Grandjean , C. Levy , Y. Thiery , A. Lucas , A. Marboeuf , A. Le Friant , E. Fernandez-Nieto , M. Castro-Diaz
MS Corresponding Organizer:
Dr.
Sonja Hellebrand
(University of Duisburg-Essen)
Chaired by:
Dr. Sonja Hellebrand
(University of Duisburg-Essen)
,
Prof. Johanna Waimann
(Ruhr-Universität Bochum )
-
Keynote
Multiscale modelling of T1 precipitation in Al-Cu-Li alloys
A. Safi , E. Mathew , R. Chafle , B. Klusemann -
A fully coupled multiscale model of cancellous bone considering mechanical, electric and magnetic effects
M. Blaszczyk , K. Hackl -
A Thermodynamic Approach to Modelling Shape Memory Alloys
C. Erdogan , T. Bode , P. Junker -
Variable Scale Separations in Morphology-Based Homogenization of Phase Transforming Solids
V. von Oertzen , B. Kiefer -
Micromechanical constitutive multiscale modeling of rate-dependent dissipation and switching effects in ferroelectrics
A. Warkentin , A. Ricoeur
MS Corresponding Organizer:
Prof.
Rosaire Mongrain
(McGill University)
Chaired by:
Prof. Lisa Prahl Wittberg
(FLOW, Dept. Engineering Mechanics, Royal Institute of Technology (KTH))
,
Prof. Richard Leask
(Mcgill University)
-
Keynote
Relationship between Growth Rate and Shear Rate in Platelet Aggregation Using Microfluidics
S. Kobayashi -
An Efficient and Robust Computational Model for Strain-Based Hemolysis Prediction in Eulerian Frame
N. Dirkes , M. Behr -
Shear-Induced Platelet Aggregation is Mediated by αIIbβIII Integrin Function in a Stenotic Model
C. Watson , K. Manning -
Simulating the Effect of Hemolysis on Thrombosis in Ventricular Assist Devices
H. Valtchanov , L. Atkinson , R. Cecere , R. Mongrain
MS Corresponding Organizer:
Dr.
Esteban Ferrer
(Universidad Politécnica de Madrid )
Chaired by:
Dr. Esteban Ferrer
(Universidad Politécnica de Madrid )
,
Dr. Gonzalo Rubio
(UPM)
-
Accelerating High Order Discontinuous Galerkin solvers using neural networks
E. Ferrer , O. Mariño , D. huergo -
Enhancing Computational Fluid Dynamics through Unsupervised Machine Learning
G. Rubio , K. Otmani , K. Tlales , A. Mateo-Gabín , G. Ntoukas , O. Mariño , E. Valero , E. Ferrer -
A POD-based reduced order finite volume model for solving shallow water equations with parameterized source terms
P. Solán-Fustero , J. Gracia , A. Navas-Montilla , P. García-Navarro -
A Reinforcement Learning Strategy for Mesh Adaptation in High-order CFD Solvers
D. Huergo , M. De Frutos , Ó. Mariño , G. Rubio , E. Ferrer -
Application of PINNs to the modelling of secondary waves in vessels for transient blood flow
J. Orera , J. Ramírez , P. García-Navarro , J. Murillo -
Application of an Automated Machine Learning Framework for the Preliminary Design of Engine Combustion Systems
M. Centini , I. Cozza , R. McAlpine
MS Corresponding Organizer:
Prof.
Petrie Meyer
(Stellenbosch University)
Chaired by:
Prof. Petrie Meyer
(Stellenbosch University)
-
Design of High-performance Reflector Antenna Systems for Radio Astronomy
D. de Villiers , R. Lehmensiek -
Robust Exponential Analysis in One and More dimensions
A. Cuyt , W. Lee -
Globalized Trust-Region Optimization: An Unassuming Approach
Y. Lindemans , A. Bekasiewicz , I. Couckuyt , T. Dhaene -
Swarm Intelligence Parametric Yield Optimization of Microwave Devices using the Non-Linear Partial Least-Squares Polynomial Chaos Expansion Technique
K. Nfanyana , L. Johnson , P. Meyer -
Developments in Macro Basis Function Methods for Electromagnetic Analysis
M. Botha , K. Sewraj , P. Cilliers , A. Conradie , W. Dommisse , T. Rylander
MS Corresponding Organizer:
Dr.
Alexander Heinlein
(TU Delft)
Chaired by:
Dr. Alexander Heinlein
(TU Delft)
,
Prof. Sashikumaar Ganesan
(Indian Institute of Science)
-
Analysis of hybrid finite element / neural network discretization schemes
T. Richter , C. Lessig , R. Jendersie , U. Kapustsin , M. Nils -
Improving the Convergence of Pseudo-Time Stepping for CFD Simulations With Neural Networks.
A. Zandbergen , A. Heinlein , T. van Noorden -
Deep learning-based high-order entropy stable schemes for conservation laws
D. Ray , P. Charles -
Learning Discretization Invariant Closure Models for Large Eddy Simulation of Turbulent Flows
S. Agdestein , B. Sanderse -
Hybrid Finite Volume-Neural Network Method Applied to Fluid Flow Problems
O. Bublík -
Optimizing Groundwater Heat Pump Placement: Modelling Heat Transport with CNNs
J. Pelzer , M. Schulte
MS Corresponding Organizer:
Dr.
Yunteng Wang
(Universitat fur Bodenkultur Wien)
Chaired by:
Dr. Yunteng Wang
(Universitat fur Bodenkultur Wien)
,
Dr. Juan Marcelo Gimenez
(CIMNE)
-
Modelling the Hydration of Bentonites Under Isothermal and Non-Isothermal Conditions Using a Double Porosity Model
R. Vasconcelos , C. Rodríguez , A. Gens , J. Vaunat -
Variational modeling of drying induced complex fracture initiation in granular geomaterials
S. OMMI , G. SCIARRA -
Non-associative plasticity with the bipotential approach and semi-smooth Newton methods
L. Guillet , V. Acary , F. Bourrier , O. Goury -
Unsaturated Hydromechanics and Cracking in Opalinus Clay
T. Cajuhi , G. Ziefle , J. Maßmann , T. Nagel , K. Yoshioka -
A Fully Coupled Analysis Procedure for Liquefaction of Unsaturated Sands
M. Muraleetharan , B. Zhang -
Enhanced finite element modeling of deep earthquake nucleation including phase transformation and thermal effects
C. Foster , S. Chi , F. Sindhusuta , A. Panse , J. Mofidi Rouchi -
Validation of a Numerical Model of Seismic Newtonian Noise for the Einstein Telescope
P. Reumers , S. François , G. Degrande
MS Corresponding Organizer:
Dr.
Marco ten Eikelder
(TU Darmstadt)
Chaired by:
Dr. Yu Leng
(Los Alamos National Laboratory)
-
Consistent Lagrangean Formulation of Phase Separation in Chemoelastic Polymer Solutions at Large Strains
A. Gomero Soria , A. Stracuzzi , A. Ehret -
Phase Field Modelling of CuCrZr Alloy for Nuclear Fusion
D. Kell , T. Haynes -
Phase Field Modeling of Non-cooperative Eutectoid Growth in Multicomponent Steels
K. Ankit -
Chemo-elastic benchmark for a multiphase-field model
T. Kannenberg , Y. Bai , K. Umate , D. Schneider , B. Svendsen , B. Nestler -
Multiphase-Field modeling of microstructure evolution incorporating crystal plasticity
A. Prahs , L. Schöller , T. Kannenberg , D. Schneider , B. Nestler
MS Corresponding Organizer:
Dr.
Filipe Pereira
(Los Alamos National Laboratory)
Chaired by:
Dr. Filipe Pereira
(Los Alamos National Laboratory)
-
SRS Models for Practical Flows: A Review
F. Pereira -
LES and URANS Modelling of Richtmyer-Meshkov Instability with Anisotropic Strain
B. Pascoe , M. Groom , B. Thornber -
Advances in kinetic turbulence modeling via lattice Boltzmann simulations
F. Marson , O. Malaspinas -
Large Eddy Simulations of Heat Transfer in Additively Manufactured Surfaces with Varied Roughness
H. Garg , C. Fureby -
On the Evaluation of Large Eddy Simulation of a Wind-turbine Array Boundary Layer
D. Folch , F. Trias , A. Oliva -
On the Dynamic Stall of Flapping Foils using a High-Order DG Scheme and Hybrid RANS/LES Models
L. Alberti , E. Carnevali , A. Crivellini , G. Noventa
MS Corresponding Organizer:
Prof.
Jose Madeira
(IDMEC, IST, Universidade de Lisboa)
Chaired by:
Dr. Nastaran Shahmansouri
(Autodesk Canada)
,
Mr. Francisco Vieira
(IDMEC, Instituto de Engenharia Mecânica)
-
Design Optimization based on the Redundancy Matrix
M. von Scheven , D. Forster -
Improving Accuracy in Shape Generation of Motors Using Generative Models
M. Tamura , K. Suzuki , Y. Kondo , K. Suzuki , K. Yonekura -
Approximate calculation of changes in local and global quantities due to design modifications
D. Materna -
Multidisciplinary Modular Approach to Kinematic Mechanism Synthesis
N. Shahmansouri , H. Cheong , A. Tessier , A. Butscher -
Optimal Design of an Ecological Corridor Surrounding Restricted Urban Areas
L. Alvarez-Vazquez , N. Garcia-Chan , A. Martinez , M. Vazquez-Mendez
MS Corresponding Organizer:
Prof.
Mokarram Hossain
(Swansea University)
Chaired by:
Prof. Stephan Rudykh
(UW-Madison)
-
Finite element solution of flexoelectricity and flexo-photovoltaics at finite deformations
S. Pérez-Escudero , I. Arias , S. Fernàndez-Méndez -
Mixed FE for numerical modeling of size-dependent effects in ferroelectric materials
S. Kozinov , P. Serrao -
Knowledge-Constrained Splines for the Prediction of Instabilities of Magnetorheological Elastomers
C. Haag , M. Keip , F. Fritzen -
Data-driven analysis of structural instabilities in dielectric elastomers based on a variational saddle-point principle
S. Sriram , E. Polukhov , M. Keip -
A numerical framework for the simulation of coupled electromechanical growth
M. Hossain , Z. Li , C. Kadapa , J. Wang -
Designing wide and tunable phononic band gaps in hard-magnetic soft composites via topology optimization
Z. Alam , A. Sharma
MS Corresponding Organizer:
Dr.
Andreas Lundbäck
(Luleå University of Technology)
Chaired by:
Dr. Andreas Lundbäck
(Luleå University of Technology)
,
Prof. Jesper Hattel
(Danmarks Tekniske Universitet (DTU))
-
A multi-physical material point method for simulating the metal additive manufacturing process
Y. Jiang -
Modelling and Simulation of High Velocity Impact of Particles in Cold Spray Additive Manufacturing
J. QI , R. RAOELISON , M. RACHIK -
Numerical Simulation of Fluid Flow and Track Formation in a WLAM Process
Z. Kong , D. Solas , M. Brehier , G. Guillemot , C. Gandin , M. Bellet -
Numerical Simulation of the Multi-Strand Deposition in Fused Deposition Modeling
F. Gonzalez , S. Elgeti , M. Behr -
ALE-based FEM formulation for free-surface viscoelastic flows in extrusion-based bioprinting
F. Chirianni , G. Vairo , M. Marino
MS Corresponding Organizer:
Dr.
Michael Abdemalik
(Eindhoven University of Technology)
Chaired by:
Dr. Julian Koellermeier
(University of Groningen)
,
Prof. Harald van Brummelen
(Eindhoven University of Technology)
-
Globally Hyperbolic One-Dimensional Moment Closures\\Based on the Orthogonality of Polynomials
W. Morin , E. Rice , J. McDonald -
Zooming into Kinetic Equations using the Characteristic Mapping Method
P. Krah , X. Yin , J. Bergmann , J. Nave , K. Schneider -
Approaches for distribution function inference in a gas dynamics context
G. Oblapenko , M. Torrilhon -
Scaling of a Coupled Electron-Ion-Neutral Boltzmann System for Hall Thrusters
Z. Tazakkati , T. Pichard , A. Alvarez Laguna , M. Massot -
An Asymptotic Preserving Kinetic Scheme for the M1 Model of Non-local Thermal Transport
J. Feugeas , J. Mathiaud , L. Mieussens , T. Vigier
MS Corresponding Organizer:
Prof.
Fadi Aldakheel
(Leibniz Universität Hannover)
Chaired by:
Prof. Miguel Bessa
(Brown University)
,
Prof. Oliver Weeger
(TU Darmstadt)
-
Deep learning for accelerating computational homogenization schemes: application to flows in porous media
M. Shakoor , V. Itier , J. Mennesson -
Symmetry-enforcing neural networks for constitutive modeling
K. Garanger , J. Rimoli -
A physical-informed FE-NN methodology for predicting highly nonlinear thermomechanical response of thermoset and thermoplastic polymers
N. Tang , P. Hao , F. Gilabert Villegas -
Evaluating Filled Rubber Viscoelasticity: A Comparative Analysis between NODEs and Classical Phenomenological Models
F. Califano , J. Ciambella -
A data-driven framework to establish surrogate constitutive models of porous elastomers
M. Bozkurt , V. Tagarielli
MS Corresponding Organizer:
Prof.
Stefan Turek
(TU Dortmund University)
Chaired by:
Prof. Axel Klawonn
(Universität zu Köln)
,
Prof. Stefan Turek
(TU Dortmund University)
-
Bringing Scientific Software, Exascale Computing and Cutting Edge Technology to the Industry
J. Paul , M. Geveler -
GPU Optimisation of a Finite Element Code for Incompressible Flow
H. Owen , D. Ernst , O. Lehmkuhl , G. Hager , G. Wellein -
Lattice-Boltzmann methods for the efficient simulation of wind turbines in atmospheric flows
H. Schottenhamml , A. Anciaux-Sedrakian , F. Blondel , U. Rüde -
Lineal: An Efficient, Hybrid-Parallel Linear Algebra Library
K. Böhm , O. Ippisch -
Efficient numerical methods for seismic wave propagation in fractured porous media
M. Favino , R. Krause
MS Corresponding Organizer:
Dr.
Andre Massing
(Norwegian University of Science and Technology)
Chaired by:
Dr. Maxim Olshanskii
(University of Houston)
,
Prof. Santiago Badia
(Monash University)
-
Unfitted Finite Elements for Explicit Boundary Representations
P. Martorell , S. Badia -
Hybridized CutFEM for Problems on CAD Surfaces with Gaps
M. Larson , K. Larsson , T. Jonsson -
Geometry smoothing and local enrichment of the finite cell method with applications to cemented granular materials
M. Gorji , M. Komodromos , E. Hadjiloo , J. Grabe , A. Düster -
EigenValue Stabilization in Explicit Immersed Simulations
S. Eisenträger , L. Radtke , A. Düster , D. Juhre , D. Schillinger
MS Corresponding Organizer:
Ms.
Martha Kalina
(TU Dresden)
Chaired by:
Prof. Lampros Svolos
(University of Vermont)
,
Prof. Fadi Aldakheel
(Leibniz Universität Hannover)
-
A novel phase field method for modeling brittle fracture in functionally graded materials under thermal shock
G. Moutsanidis , M. Rahimi , L. Svolos -
A novel approach for a thermo-mechanically coupled and gradient-enhanced damage model
F. Liu , D. Jantos , P. Junker -
Phase-field ductile fracture simulations of thermal cracking in additive manufacturing
H. Ruan -
Variational Phase-field Modeling of Dynamic Hydraulic Fracture in Saturated Porous Media
M. Abdolkhani , M. Mollaali , K. Yoshioka -
On the importance of strength in phase-field models of dynamic, brittle fracture
Y. Liu , O. Lopez-Pamies , J. Dolbow -
Estimation of the cracking threshold using damage gradient models: application to composite glass-ceramic materials with swelling inclusion
G. Feugueur , L. Gélébart , C. Maurini , S. Miro
MS Corresponding Organizer:
Dr.
Michele Terzano
(Graz University of Technology)
Chaired by:
Dr. Michele Terzano
(Graz University of Technology)
,
Prof. Gerhard Holzapfel
(Graz University of Technology)
-
MicroCT-inspired multiscale modeling of arterial tissue
M. Pétré , L. Maes , G. Hanon , M. Dalbosco , G. Holzapfel , L. Delannay , G. Kerkchofs , N. Famaey -
MRI-based Computational Modeling of Human Cortical Folding
A. Kerachni , T. Lavigne , S. Urcun , M. Alenyà , O. Camara , J. Lefèvre , F. Rousseau -
A Modelling Approach for Micro Crack Healing in Bones by Flexoelectricity-induced Surface Growth
C. Witt , T. Kaiser , A. Menzel -
Multi-vertebrae finite element models: the effect of the discs’ constitutive modelling on vertebrae deformation
A. Aldieri , S. Mallia , C. Garavelli , M. Palanca , M. Viceconti
MS Corresponding Organizer:
Prof.
François Jouve
(Université Paris Cité)
Chaired by:
Dr. Samuel Amstutz
(Avignon Université)
,
Mr. Charles Dapogny
(CNRS, Laboratoire Jean Kuntzmann, Université Grenoble Alpes, Saint Martin d’Hères)
-
Topology optimization in the design of stress-constrained compliant mechanisms
D. Villalba , M. Gonçalves , J. Dias-de-Oliveira , A. Andrade-Campos , R. Valente , J. París , F. Navarrina -
Maximization of Eigenfrequencies using Shape- and Topology Optimization
K. Jensen -
Multi-Material Topology Optimization for Shape-Morphing Electroactive Polymers
J. Martínez-Frutos , R. Ortigosa , A. Gil -
Anisotropic perimeter approximation for topology optimization
S. Amstutz , B. Bogosel -
Phase-field Topology Optimization of Elasto-plastic Contact Structures
A. Myśliński -
Multiscale Structure of Optimally Designed Robust Composites
E. Cherkaev , J. Baker , A. Cherkaev
MS Corresponding Organizer:
Prof.
Alessandro Reali
(University of Pavia)
Chaired by:
Prof. Giancarlo Sangalli
(University of Pavia, Italy)
,
Prof. Trond Kvamsdal
(Norwegian University of Science and Technology (NTNU))
-
Keynote
Numerical modeling of the cardiac tissue via an isogeometric collocation approach
M. Torre , S. Morganti , F. Pasqualini , A. Reali -
Large rotation isogeometric shell model for alternating stiff/soft curved laminates including warping and thickness strain with minimal dofs
L. Leonetti , D. Magisano , G. Garcea -
AT1 high-order Isogeometric phase-field modeling for brittle fracture
L. Greco , A. Patton , E. Maggiorelli , M. Negri , A. Reali -
Neural-Networks and Hierarchical Matrices for Automatic Stabilization of Navier-Stokes IGA Solver
T. Służalec , M. Dobija , M. Łoś , A. Paszynska , M. Paszynski -
Isogeometric Galerkin Method for Equilibrium-Based Interlaminar Stress Recovery of Laminated Composite Plates
S. Jangravi , P. Khaneh Masjedi , A. Reali
MS Corresponding Organizer:
Prof.
Marco D. de Tullio
(Politecnico di Bari)
Chaired by:
Mr. Manuel Garcia-Villalba
(TU Wien)
,
Mr. Alessandro Nitti
(Polytechnic University of Bari)
-
A Local and Explicit Forcing Correction to the Moving-Least-Squares IBM
G. Vagnoli , M. Scarpolini , R. Verzicco , F. Viola -
Simulations and analysis of the fracturing of porous media in laminar flow
F. Dalla Barba , F. Picano -
Recent Advances of Simplex Space-Time Finite Elements For Multi-Physics Problems
N. Hosters , P. Antony , M. Billen , M. von Danwitz , T. Spenke , M. Behr -
Performance and Stability Assessment of a Coupled Three-Field Thermal Fluid-Structure Interaction Simulation of a Simplified Thin-Walled Skin Heat Exchanger
L. Kreuzeberg , M. Haupt , D. Hahn , I. Antonau , S. Heimbs -
Fluid-Structure Interaction Framework for the Design of Extrusion Dies using the Immersed Boundary Surface Method in foam-extend
J. Sasse , M. Schön , C. Hopmann
MS Corresponding Organizer:
Dr.
Emanuela Bosco
(Eindhoven University of Technology)
Chaired by:
Dr. Emanuela Bosco
(Eindhoven University of Technology)
,
Prof. Emilio Martinez-Pañeda
(University of Oxford)
-
Data-driven modelling of anisotropic damage from RVE fracture simulations
J. Yvonnet , P. Li , Q. He -
Hydro-mechanical model for subsurface erosion with analyses of soil piping and void formation
I. Scheperboer , A. Suiker , E. Bosco , F. Clemens -
Phase-Field-Based Chemo-Mechanical Modelling of Corrosion-Induced Cracking in Reinforced Concrete
E. Korec , M. Jirásek , H. S. Wong , E. Martínez-Paneda
MS Corresponding Organizer:
Dr.
Konrad Perzyński
(AGH University of Krakow)
Chaired by:
Dr. Konrad Perzyński
(AGH University of Krakow)
,
Ms. Paulina Stempin
(Poznan University of Technology)
-
Characterization and modeling of polymer nanocomposites across the scales - A comprehensive approach covering the mechanical behavior of matrix, filler, and interphase
M. Ries -
Computational modelling and simulation of heart electromechanics and their possible clinical application
D. Martonová -
Universality and scaling relations for turbulent/non-turbulent interfaces in free shear flows
M. Zecchetto -
New Approach to Composite Materials Modeling under Extreme Mechanical and Thermal Loads
S. Suljevic -
The Phase-Field Modeling of Fracture Evolution in Ductile Materials with Application to Paperboard Mechanics
A. Marengo
MS Corresponding Organizer:
Dr.
Alberto Barontini
(University of Minho, ISISE, ARISE)
Chaired by:
Dr. Alberto Barontini
(University of Minho, ISISE, ARISE)
-
Simulation of ground penetrating radar data for railway condition assessment via Physics-Informed Neural Networks
T. Rigoni , G. Arcieri , M. Haywood-Alexander , D. Haener , E. Chatzi -
Structural Stress Estimation using Digital Image Correlation and Machine Learning
W. Mucha , G. Kokot -
Dynamic identification of structures by means of stochastic subspace identification method.
S. Scalisi , M. Cuomo -
Sensor Integrity Assessment and Spatio-Temporal Interpolation using Graph Neural Networks for Radioactive Waste Repository Monitoring
P. Hembert , C. Ghnatios , J. Cotton , F. Chinesta -
Review and challenges for a realistic numerical SHM benchmark
F. Marafini , G. Zini , A. Barontini , M. Betti , G. Bartoli , N. Mendes , A. Cicirello
MS Corresponding Organizer:
Dr.
Evangéline Capiez-Lernout
(Université Gustave Eiffel)
Chaired by:
Dr. Bo YANG
(Uppsala University)
,
Dr. Evangéline Capiez-Lernout
(Université Gustave Eiffel)
-
New concepts for nonlinear analysis of turbine blade-damper systems to support better decision making on design
C. Gastaldi , M. GOLA -
Geometrically Nonlinear Dynamics of Graphene-based Waveguides via Second Strain Gradient Formulation
B. Yang , M. Mousavi -
Computational Update of a Statistical Surrogate Model for Nonlinear Stochastic Dynamics using Partial Target Dataset in the Context of Aerospace Nozzle Analysis
E. Capiez-Lernout , O. Ezvan , C. Soize -
Back-Analysis of Multi-Drum Columns to Estimate Information about Past Earthquakes
L. Papaloizou , P. Polycarpou , E. Sarris , M. Kyriakides -
Coupled Thermoelasticity and Non-Local Radiation Modelling for Cryogenic Storage Vessels
S. Blakseth , M. Gjennestad , A. Massing
MS Corresponding Organizer:
Prof.
Bernhard Pichler
(TU Wien)
Chaired by:
Prof. Miroslav Vořechovský
(Brno University of Technology)
,
Prof. Rostislav Chudoba
(RWTH Aachen University)
-
Combining material and structural design to reduce the global warming potential of concrete structures
J. Unger , E. Tamsen , A. Agrawal , P. Koutsourelakis -
Computational approach to the bond behaviour between FRP rebars and concrete
C. Lopes , G. Lesiuk , S. Duda , M. Smolnicki , P. Zielonka , B. Pedrosa , W. Błażejewski , T. Socha , A. Denisiewicz , K. Kula , S. Seitl , M. Vořechovský -
Discrete model for monotonic, cyclic and fatigue loading of concrete
M. Vořechovský , V. Sadílek , J. Eliáš , J. Mašek -
Stress development of blended concretes at elevated temperatures at multiple scales
S. Peters , G. Meschke -
Modeling of time- and temperature-dependent cyclic behavior of material interfaces with visoelastic-viscoplastic cumulative sliding constitutive hypothesis
A. Baktheer , R. Chudoba -
Universal hydration features of white cement pastes identified by means of the degree of precipitation
N. Jiménez Segura , B. Pichler , C. Hellmich
MS Corresponding Organizer:
Dr.
Massimo Carraturo
(University of Pavia)
Chaired by:
Dr. Massimo Carraturo
(University of Pavia)
,
Prof. Simone Morganti
(University of Pavia)
-
Unraveling Tension-Compression Asymmetry in Additively Manufactured NiTi TPMS Structures
Z. Yan , M. Hermans , J. Jovanova , V. Popovich -
Geometrically nonlinear shear-deformable beam for modelling lattice metamaterials
C. Bonvissuto , E. La Malfa Ribolla , M. Horàk , M. Jirásek -
Programming Instabilities in Curved-Beam Metamaterials via Deep Generative Models
G. Felsch , V. Slesarenko
MS Corresponding Organizer:
Dr.
Maria Han Veiga
(Ohio State University)
Chaired by:
Mr. Lorenzo Micalizzi
(North Carolina State University)
,
Dr. Davide Torlo
(Università di Roma La Sapienza)
-
Keynote
Hyperbolic viscous flow using quaternion fields
S. Chiocchetti -
Runge-Kutta discontinuous Galerkin methods with compact stencils for hyperbolic conservation laws
Q. Chen , Z. Sun , Y. Xing -
High-order ADER Discontinuous Galerkin schemes for compressible two-phase flows in elastic media
L. del Rio Martin , M. Dumbser -
Dissipation-based WENO Stabilization of High-order Continuous and Discontinuous Galerkin Methods for Hyperbolic Problems
J. Vedral , D. Kuzmin -
Spectral-Difference method for magneto-hydro-dynamics
D. Velasco-Romero , R. Teyssier , M. Han-Veiga
MS Corresponding Organizer:
Mr.
Matteo Torzoni
(Politecnico di Milano)
Chaired by:
Dr. Marco Tezzele
(Emory University)
,
Mr. Matteo Torzoni
(Politecnico di Milano)
-
Keynote
Digital Twins: a lifecycle-long journey with examples
L. Mainini , M. Diez -
Generative strategies to empower physics-based wave propagation with deep learning. Applications to earthquake engineering and structural health monitoring.
F. Gatti , H. Gabrielidis , G. Granados , G. Jacquet , F. Lehmann , L. Rosafalco , S. Mariani , R. Miorelli , A. Corigliano , D. Clouteau -
Combining experimental and synthetic data in Deep Learning for damage detection
A. Fernandez-Navamuel , D. Pardo , F. Magalhaes , D. Zamora-Sanchez , A. Omella , D. Garcia-Sanchez