Room Auditorium VI
Auditorium VI - CCL (Ground Floor)
Sessions taking place in this room:
Monday, 03 June, 2024
Modelling and Simulation for Additive Manufacturing I
Chaired by:
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
01:45
Energy Efficiency - A key lever for Sustainable Flight
Daniel Reckzeh
Daniel Reckzeh
Chaired by:
Prof. Jacques Periaux (cimne , Spain)
Prof. Jacques Periaux (cimne , Spain)
02:40
Modelling and Simulation for Additive Manufacturing II
Chaired by:
Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden)
Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden)
05:00
Modelling and Simulation for Additive Manufacturing III
Chaired by:
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
Tuesday, 04 June, 2024
Modelling and Simulation for Additive Manufacturing IV
Chaired by:
Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden)
Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden)
01:45
GENERIC-Based Structure-Preserving Numerical Methods for Coupled Problems
Peter Betsch
Peter Betsch
Chaired by:
Prof. Jorge Ambrosio (IDMEC - Instituto Superior Tecnico , Portugal)
Prof. Jorge Ambrosio (IDMEC - Instituto Superior Tecnico , Portugal)
02:40
Modelling and Simulation for Additive Manufacturing V
Chaired by:
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
05:00
Modelling and Simulation for Additive Manufacturing VI
Chaired by:
Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden)
Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden)
Wednesday, 05 June, 2024
Modelling and Simulation for Additive Manufacturing VII
Chaired by:
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Prof. Jesper Hattel (Danmarks Tekniske Universitet (DTU) , Denmark)
01:45
Thermodynamics of learning physical phenomena
Elias Cueto
Elias Cueto
Chaired by:
Prof. Jose Cesar de Sa (INEGI/FEUP , Portugal)
Prof. Jose Cesar de Sa (INEGI/FEUP , Portugal)
02:40
Recent trends in elastic and acoustic metamaterials I
Chaired by:
Prof. Giuseppe Failla (University of Reggio Calabria, Italy , Italy) , Prof. Antonio Palermo (University of Bologna , Italy)
Prof. Giuseppe Failla (University of Reggio Calabria, Italy , Italy) , Prof. Antonio Palermo (University of Bologna , Italy)
05:00
Recent trends in elastic and acoustic metamaterials II
Chaired by:
Prof. Antonio Palermo (University of Bologna , Italy) , Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy)
Prof. Antonio Palermo (University of Bologna , Italy) , Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy)
Thursday, 06 June, 2024
Recent trends in elastic and acoustic metamaterials III
Chaired by:
Prof. Giuseppe Failla (University of Reggio Calabria, Italy , Italy) , Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy)
Prof. Giuseppe Failla (University of Reggio Calabria, Italy , Italy) , Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy)
01:45
On the Improvement of Solar Sail Membranes through a Multiscale Approach using Graphene-Based Composites
Nuno Silvestre
Nuno Silvestre
Chaired by:
Prof. Hermann Matthies (Institute of Scientific Computing / TU Braunschweig , Germany)
Prof. Hermann Matthies (Institute of Scientific Computing / TU Braunschweig , Germany)
02:40
Recent trends in elastic and acoustic metamaterials IV
Chaired by:
Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy) , Prof. Giuseppe Failla (University of Reggio Calabria, Italy , Italy)
Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy) , Prof. Giuseppe Failla (University of Reggio Calabria, Italy , Italy)
05:00
Recent trends in elastic and acoustic metamaterials V
Chaired by:
Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy) , Prof. Antonio Palermo (University of Bologna , Italy)
Dr. Andrea Francesco Russillo (University of Reggio Calabria , Italy) , Prof. Antonio Palermo (University of Bologna , Italy)
Friday, 07 June, 2024
Data-Enhanced Reduced Order Modeling I
Chaired by:
Dr. Marco Tezzele (Emory University , United States) , Dr. Romit Maulik (Argonne National Laboratory , United States)
Dr. Marco Tezzele (Emory University , United States) , Dr. Romit Maulik (Argonne National Laboratory , United States)
01:45
Modelling the Dynamics of Masonry Structures With Discrete Elements
José V. Lemos
José V. Lemos
Chaired by:
Prof. Carlos Pina (LNEC - Laboratório Nacioanal de Engenharia Civil , Portugal)
Prof. Carlos Pina (LNEC - Laboratório Nacioanal de Engenharia Civil , Portugal)
02:40
Data-Enhanced Reduced Order Modeling II
Chaired by:
Dr. Marco Tezzele (Emory University , United States) , Dr. Romit Maulik (Argonne National Laboratory , United States)
Dr. Marco Tezzele (Emory University , United States) , Dr. Romit Maulik (Argonne National Laboratory , United States)
